 |
Advantage® Deluxe Electrol® |
- Handsome white powder-coated closure doors and case provide a clean look and allow easy installation of ceiling tiles
- Designed to have the case installed during the "rough-in" stages of construction and the fabric assembly during the finish stage
- Standard with 2" black drop at the top; screens can be ordered with extra black drop
at the top or bottom
- Standard with built-in Low Voltage Control and Decora-style 3-position wall switch; built-in SCB100 and SCB-200 (RS-232 control) are also available
- The Advantage® Deluxe case meets Underwriters Laboratories (UL) Plenum Testing Standards for use in air handling space
- "S" after the price signifies that the screen surface will be seamed
Spec Sheet
Instructions |
Video (4:3) Format Advantage® Deluxe Electrol®
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution. |
Viewing Area
 |
Diagonal
|
(+) Border
|
Matte White
|
HC Matte White
|
Video Spectra
|
High Power
|
| 43" x 57" |
72" |
1.25" |
$2,229.64  |
$2,229.64 |
$2,229.64 |
$2,340.79 |
| 50" x 67" |
84" |
1.5" |
$2,312.10 |
$2,312.10 |
$2,312.10 |
$2,423.25 |
| 57" x 77" |
96" |
2.0" |
$2,368.79 |
$2,368.79 |
$2,368.79 |
$2,479.94 |
| 60" x 80" |
100" |
2.0" |
$2,391.83 |
$2,391.83 |
$2,391.83 |
$2,502.98 |
| 69" x 92" |
120" |
2.0" |
$2,408 |
$2,407.60 |
$2,407.60 |
$2,518.75 |
| 87" x 116" |
150" |
2.0" |
$2,635.05 |
$2,635.05 |
$2,635.05 |
$2,746.20 S |
| 105" x 140" |
180" |
2.0" |
$2,710.57 |
Not Available |
Not Available |
$2,821.72 S |
| 120" x 160" |
200" |
2.0" |
$2,787.88 |
Not Available |
| For larger sizes, see Large Advantage® Deluxe Electrol® |
HDTV (16:9) Format Advantage® Deluxe Electrol®
Recommended for use with native 16:9 projectors such as those with WXGA, 720p, and 1080p resolution. |
| Viewing Area |
Diagonal |
(+) Border |
Matte White |
HC Matte White |
Video Spectra |
High Power |
| 45" x 80" |
92" |
2.0" |
$2,373.68 |
$2,373.68 |
$2,373.68 |
$2,484.83 |
| 52" x 92" |
106" |
2.0" |
$2,415.63 |
$2,415.63 |
$2,415.63 |
$2,526.78 |
| 54" x 96 " |
110" |
2.0" |
$2,466.92 |
$2,466.92 |
$2,466.92 |
$2,578.07 |
| 58" x 104" |
119" |
2.0" |
$2,508.22 |
$2,508.22 |
$2,508.22 |
$2,619.37 |
| 65" x 116" |
133" |
2.0" |
$2,582.29 |
$2,582.29 |
$2,582.29 |
$2,693.44 |
| 78" x 139" |
159" |
2.0" |
$2,691.18 |
$2,691.18 |
$2,691.18 |
$2,802.33 S |
| For larger sizes, see Large Advantage® Deluxe Electrol® |
|
|
| Extra Drop |
| [No Image Available] |
Extra Black Drop. Price is per square foot. Must be ordered with screen. |
$2.50 |
| Built-In Control Options |
  |
| 2A |
Built-in SCB-100 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-100 Controller. A single Serial Control Board provides control over any single motor screen, masking screen, or projector lift. Can provide status of whether screen is up, down, or in stop positions. Must be ordered with screen. Tutorial. |
$305 |
| NET-100 Ethernet-Serial Adapter. Allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. |
$185 |
| Built-in SCB-200 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-200 Controller, wall controller, or infrared controller. Can provide status of whether screen is up, down, or in stop positions. Multiple SCB-200 controllers may be daisy-chained* for multi-aspect ratio screens while using a single RS-232 connection or optional controller. Must be ordered with screen. Tutorial. |
$295 |
| NET-200 Ethernet-Serial Adapter. Allows any SCB-200 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. |
$127 |
| 2B |
Built-in Video Projector Interface. 12V Direct Current Trigger. Allows screen to be raised or lowered automatically when projector is turned on or off. White rocker switch with white wall plate included for manual operation. Projector must have a 12 volt or 5 volt lead to operate this interface. Must be ordered with screen. Tutorial. |
Call |
| *Daisy-chained: describes the linear arrangement of devices as connected one to the next in order, without connection to the other devices in the chain. |
      |
| 2C |
Radio Frequency Remote Receiver for use with built-in low voltage controller. Includes RF transmitter. |
$176 |
| Spare/Replacement Radio Frequency Transmitter for use with built-in low voltage controller. |
$112 |
| 2D |
Infrared Remote Receiver for use with built-in low voltage controller. Includes IR transmitter. |
$74 |
| Spare/Replacement Infrared Transmitter for use with built-in low voltage controller. |
$58 |
| 2E |
White 3-Button LVC Switch. Requires a low voltage controller. |
$64 |
| Ivory 3-Button LVC Switch. Requires a low voltage controller. |
$64 |
| 2F |
Key Locking Cover Plate. Opens with a key to allow access to 3-button LVC switch. Stainless steel finish. |
$63 |
| 2G |
WC-200 Wall Controller. Decora-style wall controller powered from the SCB-200. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios with status LEDs. The WC-200 has a built-in IR receiver for use with the RM-200 infrared remote control. |
$116 |
| 2H |
IR-200. Includes the RM-200 14-button infrared transmitter and an infrared receiver for wireless control over SCB-200 equipped screens. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios. |
$87 |
| 2I |
RM-200. Spare/Replacement Infrared Transmitter for use with the WC-200 and IR-200. |
$60 |
| External Control Options |
 
|
| 3A |
External SCB-100 Serial Control Board. Allows for control over a screen using RS-232C communication and/or relay closures. A single Serial Control board provides control over any single motor screen, masking screen, or projector lift. Tutorial. Installation. |
$315 |
| NET-100 Ethernet-Serial Adapter allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Tutorial. |
$185 |
| 3B |
External Video Projector Interface. Allows screen to be raised or lowered automatically when projector is turned on or off. Projector must have a 5-12 volt trigger to operate this interface. White rocker switch with white wall plate is included for manual operation. Tutorial. Installation. |
$110 |
| General Screen Accessories |
    |
| Please Note: Line Voltage Switch Options Cannot be Used with LVC |
| 4A |
White 3-Position Wall Switch with Decora® cover plate (included with all single motor electric screens). |
$42 |
| Ivory 3-Position Wall Switch with Decora® cover plate (may be specified at no charge in place of the standard white switch above). |
$42 |
| 4B |
Stainless Steel 3-Position Wall Switch. |
$60 |
| Stainless Steel 3-Position Wall Switch, as substitute for standard white switch. Must be ordered with screen. |
$20 |
| 4C |
Key Locking Cover Plate. Hinged cover plate installs over the top of an existing 3-position wall switch. Opens with a key to allow access to switch. Stainless steel finish. |
$63 |
4D |
Key Operated 3-Position Wall Switch. Flush-mounted wall control switch is key-activated for security. White finish. |
$72 |
| Click here to view our selection of Laser Pointers! |
|
