HOME

Products

Email:
Sales

Customer
Service

View Order
spacer
Audio General Incorporated
1-866-866-2600
  HOME > Products > Da-Lite Screens > Electric > Tensioned Advantage® Electrol®

Save more by ordering a screen with a projector - call or email us for a quote!
Tensioned Advantage Electrol Tensioned Advantage® Electrol®
  • Handsome finished white aluminum case provides a clean look all allows easy installation of
    ceiling tiles
  • Designed to have the case installed during the "rough-in" stages of construction and the fabric
    assembly during the finish stage
  • Screen is tensioned for an extra flat surface for optimum image quality
  • Tab guide cable system maintains even lateral tension to hold surface flat; custom slat bar with
    added weight maintains vertical tension
  • Silent motor is standard on all sizes up to 9' x 12'
  • Standard with 12" black drop at the top. Screens can be ordered with extra black drop;
    however, adding extra drop may alter case dimensions.
  • Built-in SCB100, SCB-200 (RS-232 control), and low voltage control are available options
  • The Advantage® case meets Underwriters Laboratories (UL) Plenum Testing Standards for use
    in air handling space

Spec Sheet
Instructions
Video (4:3) Format Tensioned Advantage® Electrol®
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution.
Viewing Area
125x1		 Diagonal
125x1		 Da-Mat
125x1		 HC Da-Mat
125x1		 Pearlescent
125x1		 Cinema Vision
125x1		 HC Cinema Vision
125x1		 HC Cinema Perf
125x1		 Audio Vision 125x1 HC Audio Vision
125x1		 Da-Tex
125x1		 Dual Vision
125x1
43" x 57" 72" $1,473   Add to Order $1,473   Add to Order $1,473   Add to Order $1,553   Add to Order $1,553   Add to Order $1,780   Add to Order $1,725   Add to Order $1,725   Add to Order $1,663   Add to Order $1,663   Add to Order
50" x 67" 84" $1,671   Add to Order $1,671   Add to Order $1,671   Add to Order $1,752   Add to Order $1,752   Add to Order $1,979   Add to Order $1,923   Add to Order $1,923   Add to Order $1,866   Add to Order $1,866   Add to Order
60" x 80" 100" $1,827   Add to Order $1,815   Add to Order $1,827   Add to Order $1,907   Add to Order $1,907   Add to Order $2,134   Add to Order $2,078   Add to Order $2,078   Add to Order $2,022   Add to Order $2,022   Add to Order
69" x 92" 120" $2,006   Add to Order $2,006   Add to Order $2,006   Add to Order $2,086   Add to Order $2,086   Add to Order $2,312   Add to Order $2,257   Add to Order $2,257   Add to Order $2,200   Add to Order $2,200   Add to Order
87" x 116" 150" $2,444   Add to Order $2,444   Add to Order $2,444   Add to Order $2,526   Add to Order $2,526   Add to Order $2,752   Add to Order $2,671   Add to Order $2,671   Add to Order $2,582   Add to Order $2,582   Add to Order
108" x 144" 180" $3,063   Add to Order $3,063   Add to Order $3,063   Add to Order $3,143   Add to Order $3,143   Add to Order Not Available Not Available Not Available $3,201   Add to Order $3,201   Add to Order
120" x 160" 200" $3,543   Add to Order $3,543   Add to Order $3,543   Add to Order $3,623   Add to Order $3,623   Add to Order $3,681   Add to Order $3,681   Add to Order
HD (16:9) Format Tensioned Advantage® Electrol®
Recommended for use with native 16:9 projectors such as those with WXGA, 720p and 1080p resolution.
Viewing Area Diagonal Da-Mat HC Da-Mat Pearlescent Cinema Vision HC Cinema Vision HC Cinema Perf Audio Vision HC Audio Vision Da-Tex Dual Vision
45" x 80" 92" $1,823   Add to Order $1,823   Add to Order $1,823   Add to Order $1,903   Add to Order $1,903   Add to Order $2,130   Add to Order $2,074   Add to Order $2,074   Add to Order $2,018   Add to Order $2,018   Add to Order
52" x 92" 106" $2,012   Add to Order $2,012   Add to Order $2,012   Add to Order $2,092   Add to Order $2,092   Add to Order $2,319   Add to Order $2,263   Add to Order $2,263   Add to Order $2,207   Add to Order $2,207   Add to Order
54" x 96" 110" $2,054   Add to Order $2,054   Add to Order $2,054   Add to Order $2,134   Add to Order $2,134   Add to Order $2,361   Add to Order $2,281   Add to Order $2,281   Add to Order $2,249   Add to Order $2,249   Add to Order
58" x 104" 119" $2,197   Add to Order $2,197   Add to Order $2,197   Add to Order $2,278   Add to Order $2,278   Add to Order $2,504   Add to Order $2,426   Add to Order $2,426   Add to Order $2,363   Add to Order $2,363   Add to Order
65" x 116" 133" $2,434   Add to Order $2,434   Add to Order $2,434   Add to Order $2,515   Add to Order $2,515   Add to Order $2,742   Add to Order $2,640   Add to Order $2,640   Add to Order $2,572   Add to Order $2,572   Add to Order
78" x 139" 159" $3,063   Add to Order $3,063   Add to Order $3,063   Add to Order $3,143   Add to Order $3,143   Add to Order $3,369   Add to Order $3,289   Add to Order $3,289   Add to Order $3,200   Add to Order $3,200   Add to Order
90" x 160" 184" $3,520   Add to Order $3,520   Add to Order $3,545   Add to Order $3,625   Add to Order $3,596   Add to Order $3,818   Add to Order $3,738   Add to Order $3,738   Add to Order $3,653   Add to Order $3,653   Add to Order
2 - Built-in Control Options
4 - General Screen Accessories
 
Extra Black Drop
[No Image Available] Extra Black Drop. Price is per square foot. Adding extra drop may alter case dimensions. Must be ordered with screen. $2.50   Add to Order
Built-In Control Options
Built-in Network ControllerVideo Projector Interface
[No Image
Available]		 Built-In Low Voltage Controller. Includes White 3-Button LVC switch. Must be ordered with screen. $188   Add to Order
2A Built-in SCB-100 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-100 Controller. A single Serial Control Board provides control over any single motor screen, masking screen, or projector lift. Can provide status of whether screen is up, down, or in stop positions. Must be ordered with screen. Tutorial. $305   Add to Order
NET-100 Ethernet-Serial Adapter. Allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. $185   Add to Order
Built-in SCB-200 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-200 Controller, wall controller, or infrared controller. Can provide status of whether screen is up, down, or in stop positions. Multiple SCB-200 controllers may be daisy-chained* for multi-aspect ratio screens while using a single RS-232 connection or optional controller. Must be ordered with screen. Tutorial. $265   Add to Order
NET-200 Ethernet-Serial Adapter. Allows any SCB-200 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. $127   Add to Order
2B Built-in Video Projector Interface. 12V Direct Current Trigger. Allows screen to be raised or lowered automatically when projector is turned on or off. White rocker switch with white wall plate included for manual operation. Projector must have a 12 volt or 5 volt lead to operate this interface. Must be ordered with screen. Tutorial. Call
*Daisy-chained: describes the linear arrangement of devices as connected one to the next in order, without connection to the other devices in the chain.
RF RemoteIR RemoteLVC SwitchKey Locking Cover PlateWC-200IR-200
2C Radio Frequency Remote Receiver for use with built-in low voltage controller. Includes RF transmitter. $190   Add to Order
Spare/Replacement Radio Frequency Transmitter for use with built-in low voltage controller. $112   Add to Order
2D Infrared Remote Receiver for use with built-in low voltage controller. Includes IR transmitter. $74   Add to Order
Spare/Replacement Infrared Transmitter for use with built-in low voltage controller. $58   Add to Order
2E White 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
Ivory 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
2F Key Locking Cover Plate. Opens with a key to allow access to 3-button LVC switch. Stainless steel finish. $63   Add to Order
2G WC-200 Wall Controller. Decora-style wall controller powered from the SCB-200. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios with status LEDs. The WC-200 has a built-in IR receiver for use with the RM-200 infrared remote control. $116   Add to Order
2H IR-200. Includes the RM-200 14-button infrared transmitter and an infrared receiver for wireless control over SCB-200 equipped screens. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios. $87   Add to Order
2I RM-200. Spare/Replacement Infrared Transmitter for use with the WC-200 and IR-200. $60   Add to Order
External Control Options
SCB-100Video Projector Interface
3A External SCB-100 Serial Control Board. Allows for control over a screen using RS-232C communication and/or relay closures. A single Serial Control board provides control over any single motor screen, masking screen, or projector lift. Tutorial. Installation. $315   Add to Order
NET-100 Ethernet-Serial Adapter allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Tutorial. $185   Add to Order
3B External Video Projector Interface. Allows screen to be raised or lowered automatically when projector is turned on or off. Projector must have a 5-12 volt trigger to operate this interface. White rocker switch with white wall plate is included for manual operation. Tutorial. Installation. $100   Add to Order
Low Voltage ControllerRF RemoteIR RemoteLVC SwitchKey Locking Cover Plate
3C External Low Voltage Controller with White 3-Button LVC Switch. Tutorial. Installation. $188   Add to Order
3C+3D External Low Voltage Controller with White 3-Button LVC Switch and Radio Frequency 3-Button Transmitter and Receiver. Up to 75' range. $373   Add to Order
3C+3E External Low Voltage Controller with White 3-Button LVC Switch and Infrared 3-Button Transmitter and Receiver. Up to 50' range. $262   Add to Order
3D Radio Frequency Remote Control System (transmitter and receiver). Requires a low voltage controller. $176   Add to Order
Spare/Replacement Radio Frequency Transmitter.. $112   Add to Order
3E Infrared Remote Control System (transmitter and receiver). Requires a low voltage controller. $74   Add to Order
Spare/Replacement Infrared Transmitter. $58   Add to Order
3F White 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
Ivory 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
3G Key Locking Cover Plate. Hinged cover plate installs over the top of an existing LVC 3-button wall switch. Opens with a key to allow access to switch. Stainless steel finish. $63   Add to Order
General Screen Accessories
White SwitchStainless SwitchKey Locking Cover PlateKey Switch
Please Note: Line Voltage Switch Options Cannot be Used with LVC
4A White 3-Position Wall Switch with Decora® cover plate (included with all single motor electric screens). $42   Add to Order
Ivory 3-Position Wall Switch with Decora® cover plate (may be specified at no charge in place of the standard white switch above). $42   Add to Order
4B Stainless Steel 3-Position Wall Switch. $60   Add to Order
Stainless Steel 3-Position Wall Switch, as substitute for standard white switch. Must be ordered with screen. $20   Add to Order
4C Key Locking Cover Plate. Hinged cover plate installs over the top of an existing 3-position wall switch. Opens with a key to allow access to switch. Stainless steel finish. $63   Add to Order

4D

 Key Operated 3-Position Wall Switch. Flush-mounted wall control switch is key-activated for security. White finish. $72   Add to Order
Click here to view our selection of Laser Pointers!