|
Paragon:
Large Motor-in-Roller Projection Screen |
- Ideal for auditoriums and lecture halls
- Motor is installed on special vibration insulators inside a 6"-diameter steel roller
- Operation is smooth, quiet, and reliable
- Case is made of aluminum and fire-retardant hardboard; a black case may be substituted, at no extra charge
- Surface has unobtrusive horizontal seams
- Video and HDTV formats have black borders on all four sides
- Options such as extra drop (up to 24' overall height), wall mounting brackets, ceiling trim flanges, and remote controls are available upon request
- Warranted for one year against defects in materials and workmanship
- Custom sizes available
Spec Sheet
Instructions
Please note: prices listed do not include shipping |
Video (4:3) Format
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution. |
|
Image Area
|
Diagonal
|
Overall Size
(Borders Included)
|
|
|
177" x 236" |
25' |
182" x 240" |
|
|
194" x 260" |
27' 6" |
199" x 264" |
|
|
212" x 284" |
30' |
217" x 288" |
|
|
230" x 308" |
32' 6" |
235" x 312" |
|
|
248" x 332" |
35' |
253" x 336" |
|
|
HDTV (16:9) Format
Recommended for use with native 16:9 projectors such as those with WXGA, 720p, and 1080p resolution. |
Image Area
|
Diagonal |
Overall Size
(Borders Included)
|
|
|
133" x 236" |
22' 7" |
138" x 240" |
|
|
146" x 260" |
24' 10" |
151" x 264" |
|
|
160" x 284" |
27' 2" |
165" x 288" |
|
|
173" x 308" |
29' 5" |
178" x 312" |
|
|
187" x 332" |
31' 9" |
192" x 336" |
|
|
|
|
[No Image Available] |
Paragon Wall Mounting Brackets, Pair. With hardware to attach 2 brackets
to case. |
|
[No Image Available] |
Paragon Ceiling Trim Flange for Case, Pair. 12' length, with hardware for attaching to both front and back of case if required. Extruded aluminum, white finish. |
|
[No Image Available] |
Paragon Ceiling Trim Flange for End Caps, Pair |
|
External Control Options |
       |
| 2A |
External Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet. |
|
| 2B |
Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor via 2-way serial communication, a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet. |
|
| 2C |
Internet Protocol Device (LS100). Allows the connection of ethernet devices (such as network and control systems) to the MC1. Manual. |
Call |
| 2D |
Infrared Transmitter and Receiver (IRT/R). Hand-held IR transmitter. Requires LVC-III or MC1. Spec Sheet. |
|
Spare/Replacement Infrared Transmitter. |
|
| 2E |
Radio Frequency Transmitter and Receiver (WRT/R). Hand-held RF transmitter. Requires LVC-III or MC1. Spec Sheet. |
|
Spare/Replacement Radio Frequency Transmitter. |
|
| 2F |
Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC1. Spec Sheet. |
|
| 2G |
Low Voltage Switch with Locking Cover Plate (LVC-S-LCP). Single-gang 3-button wall switch with locking metal cover plate. Requires LVC-III or MC1. Spec Sheet. |
Call |
  |
| 2H |
Video Interface Control (VIC-6, VIC-12, VIC-115). Allows screen to be controlled by projector switch - when the projector comes on the screen descends automatically. Replaces the standard single-station control switch for all screens where a trigger circuit is turned on to lower the screen and off to raise the screen. Please note: this item cannot be used with any other control except for the optional override switch (below). |
VIC-6. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
VIC-12. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
VIC-115. For use where a 115V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
| 2I |
Video Interface Override Switch (VIC-OS). Lowers a screen that is normally controlled by a VIC-6, VIC-12, or VIC-115 in situations where the video projector will not be used (for example, when an overhead or slide projector is used instead of the video projector). Stainless steel. Spec Sheet. |
|
| General Screen Accessories |
    |
| [No Image Available] |
Extra Black Drop. Price is per square foot. |
|
| 3A |
Single Station Control Switch (SS-1R). Standard control switch included with all electric screens. Single-gang 3-position rocker switch with cover plate. Silver satin cover plate, black switch. 115V. Spec Sheet. |
|
White Single Station Control Switch (SS-1R). Same as SS-1R, but cover plate is white plastic. 115V. |
|
| [No Image Available] |
Multiple Station Controls (MS-3R/MS-4R). Used to control one screen from multiple locations. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. 115V. Silver satin cover plate, black switch. Spec Sheet. |
|
| 3B |
Key-Operated 3-Position Switch (KS-3). Replaces the Single Station Control Switch where the security of a key switch is required. Stainless steel. 115V. Spec Sheet. |
|
| 3C |
Locking Switch Cover Plate (SP-KPS-I). Replaces the Single Station Control Switch where the controls need to be secured behind a locking cover plate. 3-position toggle switch is ivory; cover plate and locking switch cover are brushed stainless steel. 115V. Spec Sheet. |
|
| 3D |
Key-Operated Power Supply Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115V. Spec Sheet. |
|
