$471   

$471   

$471   

Not Available

Not Available

$491   

$491   

$491   

$595   

$595   

$595   

$2,268   

$2,280   

$636   

$636   

$636   

$3,300   

$3,300   

$476   

$476   

Not Available

Not Available

$496   

$496   

$521   

$521   

$595   

$595   

$595   

$2,102   

$2,114   

$636   

$636   

$636   

$2,809   

$2,809   

Built-In Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control. Must be ordered with screen. Spec Sheet.

$162   

Infrared Transmitter and Receiver (IRT/R) for use with built-in LVC-III. Hand-held IR transmitter. Requires LVC-III. Spec Sheet.

$70   

Spare/Replacement Infrared Transmitter.

$51   

Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III. Spec Sheet.

$41   

Low Voltage Switch with Locking Cover Plate (LVC-S-LCP). Single-gang 3-button wall switch with locking metal cover plate. Requires LVC-III. Spec Sheet.

Call

External Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet.

$155.25   

Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor via 2-way serial communication, a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet.

$233   

Internet Protocol Device (LS100). Allows the connection of ethernet devices (such as network and control systems) to the MC1. Manual.

Call

Infrared Transmitter and Receiver (IRT/R). Hand-held IR transmitter. Requires LVC-III or MC1. Spec Sheet.

$72   

Spare/Replacement Infrared Transmitter.

$51   

Radio Frequency Transmitter and Receiver (WRT/R). Hand-held RF transmitter. Requires LVC-III or MC1. Spec Sheet.

$179   

Spare/Replacement Radio Frequency Transmitter.

$114   

Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC1. Spec Sheet.

$41   

Low Voltage Switch with Locking Cover Plate (LVC-S-LCP). Single-gang 3-button wall switch with locking metal cover plate. Requires LVC-III or MC1. Spec Sheet.

Call

Video Interface Control (VIC-6, VIC-12, VIC-115). Allows screen to be controlled by projector switch - when the projector comes on the screen descends automatically. Replaces the standard single-station control switch for all screens where a trigger circuit is turned on to lower the screen and off to raise the screen. Please note: this item cannot be used with any other control except for the optional override switch (below).

VIC-6. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet.

$102   

VIC-12. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet.

$102   

VIC-115. For use where a 115V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet.

$102   

Video Interface Override Switch (VIC-OS). Lowers a screen that is normally controlled by a VIC-6, VIC-12, or VIC-115 in situations where the video projector will not be used (for example, when an overhead or slide projector is used instead of the video projector). Stainless steel. Spec Sheet.

$41   

Extra Black Drop. Up to 8' overall height. Price is per square foot.

$2.50   

Single Station Control Switch (SS-1R). Standard control switch included with all electric screens. Single-gang 3-position rocker switch with cover plate. Silver satin cover plate, black switch. 115V. Spec Sheet.

$40   

White Single Station Control Switch (SS-1R). Same as SS-1R, but cover plate is white plastic. 115V.

$40   

Multiple Station Controls (MS-3R/MS-4R). Used to control one screen from multiple locations. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. 115V. Silver satin cover plate, black switch. Spec Sheet.

$92   

Key-Operated 3-Position Switch (KS-3). Replaces the Single Station Control Switch where the security of a key switch is required. Stainless steel. 115V. Spec Sheet.

$74   

Locking Switch Cover Plate (SP-KPS-I). Replaces the Single Station Control Switch where the controls need to be secured behind a locking cover plate. 3-position toggle switch is ivory; cover plate and locking switch cover are brushed stainless steel. 115V. Spec Sheet.

$87   

Key-Operated Power Supply Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115V. Spec Sheet.

$61