Panasonic PT-RZ790WU
Overview
Panasonic PT-RZ790WU
Compact and Flexible 1-Chip DLP Projector with 7000 Lumens
Deliver elite color performance in any exhibition space. The PT-RZ790WU produces the brightness, resolution, and color that designers need to enhance exhibits with bright, bold, and vivid pictures.
Deepen immersion in any environment with vivid, accurate colors backed by 7,200 center lumens of brightness thanks to Quartet Color Harmonizer color-wheel optimization and 1-Chip DLP™ imaging technology.
The PT-RZ790WU is engineered for 20,000 hours of maintenance-free reliability with lasting brightness and color uniformity from the industry’s leading dust-resistant optical engine.
With support for 4K/60p input signals, separate DIGITAL LINK and LAN terminals, and diverse optional lenses, this projector reduces installation hassles with convenient flexibility.
To compete with other forms of entertainment and education, museums are looking at new ways to make guests feel like they are part of the exhibits. At the same time, houses of worship are turning to technology to increase congregation attendance by making ceremonies more visually engaging. Because both rely on limited staff, technology that’s easy to deploy and use is critical to success.
Note: This model is white and includes a lens.
Key Features:
- Laser 1-chip DLP, 7,200 lumens (center) / 7,000 lumens (ANSI), WUXGA resolution
- Quartet Color Harmonizer technology for more accurate color reproduction
- Maintenance-free up to 20,000 hours with dust-resistant optical block and long lasting laser engine
- Supports 4K/60p signal input, separate DIGITAL LINK and LAN terminals
Features
Power to Impress with Accurate Colors
- High Brightness and Accurate Colors: Expect saturated color and finely expressed detail from next-generation 1-Chip DLP™ technology without sacrificing brightness thanks to Quartet Color Harmonizer, an original color-wheel technology with optimized optical design. It precisely modulates light-source output according to color requirements.
- Excellent Uniformity for Multi-Screen Projection: 1-Chip DLP™ technology allows for great uniformity between adjoining screens. Minimal variation between DMDs allows images to be easily blended for a more immersive viewing experience.
- System Daylight View 3 Technology: stops the picture washing out in bright light and preserves brightness, contrast, and color especially in museum and halls. It uses sensor information to adjust sharpness, gamma curves, and color to suit on-site lighting conditions.
Easy to Install and Integrate
- Smart Projector Control Mobile App: enables remote control of select projectors. Install on your iPhone or Android™ phone or tablet, connect to your compatible projectors via Wi-Fi® (LAN), and control functions including lens adjustment, input switching, status monitoring, and more. The app also features a handy auto-focus function (not supported on some mobile devices) that uses the smartphone’s camera to achieve precise projector focus, saving time on installation.
- Geometric Adjustment with Free Grid Correction: proprietary function built into onboard Geometric Adjustment that supports grid-based image adjustment via remote control. Grid resolutions of 2 x 2, 3 x 3, 5 x 5, 9 x 9, or 17 x 17 can be projected and areas of the image reshaped or geometrically altered to fix screen distortion. This correction is performed by adjusting control-points at grid-line intersections. Move freely between grid resolutions to achieve the desired level of granularity without losing work progress. This clever data-saving function allows technicians to quickly create a distortion-free image.
- Expanded Lens Lineup Widens the Scope of Installation: 11 optional interchangeable lenses cover every installation situation at wide throw distances from 0.280:1 to 8.58:1. Compatible lenses include the ET-DLE020 Ultra-Short-Throw Zoom Lens. As the world’s first1 UST lens with optical zoom, a range of post-installation adjustments are enabled via zoom and V/H lens-shift with zero screen offset. The mirrorless, aspherical glass lens suits compact projector bodies to enable front- or rear-projection in spaces otherwise too small to support short-throw projection.
- Supports Uncompressed 4K Signal Input2: via HDMI® or DIGITAL LINK terminals. The ability to play Ultra HD video at the projector’s actual resolution is useful when the same signal is distributed to multiple endpoints of differing display resolutions, making the hassle and expense of external converters a thing of the past. These projectors fit your system infrastructure and work flawlessly with other 4K-ready display devices.
- Separate LAN and HDBase-T™-based DIGITAL LINK Terminals: allow 100Base-TX- and 10BaseT-compatible control signals via Panasonic, Crestron®, AMX, and Extron® applications to be assigned to a dedicated LAN connection, freeing the DIGITAL LINK pipeline for video over cable runs of up to 150 m (492 ft)3.
Reliable Even in Harsh Conditions
- Filterless Projector Structure with Airtight Optical Block: Heat-pipe-based4 filterless cooling, dust-resistant architecture, and efficient airflow path enable deployment of a hermetically sealed optical engine. With dust resistance exceeding the industry’s toughest guidelines, you’re assured of a linear brightness ramp, superior color uniformity, and maintenance-free projection for 20,000 hours5. These benefits are welcome when the projector is installed in a difficult-to-access location.
- Dual Lasers for Failsafe Reliability: Dual laser optical engine groups diodes into two discrete modules. A redundancy circuit works to minimize brightness- and color-uniformity loss in the unlikely event a diode fails, making supported products ideal for applications where picture presentation must be maintained.
- Backup Input Setting Protects Picture Display: Projectors can be configured to switch instantaneously to a backup input-signal should the primary signal be disrupted6. This layer of insurance is invaluable in control rooms, security and surveillance applications, and for live events where image projection must not be interrupted.
- Multi Monitoring & Control Software with Early Warning Functions: Manage up to 2,048 devices via network with convenient system-map visualization and auto-search of unregistered devices. The free software is available with Early Warning Functions (automatic free 90-day trial available7). These enable real-time monitoring, abnormality detection, and more.
Other Features
- SOLID SHINE Laser Maintains Picture Quality for Longer: Thanks to two long-lasting solid-state laser modules, there are no lamps to replace, and color and brightness decline gradually in consistent, linear fashion. As well as reducing maintenance hassle, out-of-the-box picture quality is preserved for longer.
- Dynamic Light Control for High Contrast: directly modulates laser output to achieve high contrast with less power consumption. Digitally controlled frame-by-frame scene-linking modulation ensures precise light output adjustment while accurate contrast is delivered even when bright and dark scenes frequently interchange.
- Detail Clarity Processor 3: This unique Panasonic circuitry optimizes the sharpness of each image based on information gathered from four frequency bands of the video signal. The resulting images are expressed with natural, convincing realism.
- Contrast Sync and Shutter Sync Function: Contrast Sync, designed for multi-screen applications, allows dynamic contrast control to be synchronized for consistent picture quality across screens. Shutter Sync, meanwhile, synchronizes shutter on/off timing.
- Multi-Unit Brightness and Color Control: Sensors detect color and brightness apparent on screen. Projectors automatically calibrate for a uniform multi-screen image, adding a layer of convenience and cost saving for long-term events.
- Multi-screen Support System: Optimally adjusts multiple screens with edge blending, color matching, and digital image enlargement.
- Edge Blending: Edges of adjacent screens can be blended and their brightness controlled.
- Color Matching: Corrects color reproduction variations of each projector via PC control software.
- Digital Image Enlarging: Digital zoom up to 10X (H/V8). Up to 100 images (10 x 10) can be edge-blended to create a large multi-screen image.
- Single-Cable DIGITAL LINK Connection: DIGITAL LINK transmits uncompressed video, audio9, and control commands through a single CAT 5e STP cable for distances of up to 150 m (492 ft)10. Optional DIGITAL LINK Switcher or Digital Interface Box further simplifies installation, reduces cabling and associated costs, and enhances reliability.
-
Quick Start and Quick Off: The laser light-source doesn’t require any time to warm up, so images appear almost instantly. There’s also no cool-down period when turning the power off at the mains or room breaker — the projector can be turned on and off any time as necessary.
-
Geometry Manager Pro Software and Upgrade Kits: Download free Geometry Manager Pro software to expand geometric and multi-screen setup and calibration capabilities via PC. The suite includes two upgrade kits that can be optionally unlocked with paid key codes. ET-UK20 adds uniformity correction and extensive creative masking capabilities. ET-CUK10 features Auto Screen Adjustment which enables simultaneous setup (including curved-screen correction) of multiple projectors for multi-screen applications using a compatible camera. This streamlines edge-blending, color-matching, black-level, stacking, and brightness uniformity calibration.
-
Data-Cloning Function: Data-cloning function allows various settings and configuration data11 to be copied from a main projector to up to 99 sub projectors12. Alternatively, the data can be cloned to sub projectors via LAN. This feature simplifies and expedites the setup process for multi-unit projection applications.
- Selectable Operational Modes: Select your preferred operational mode to balance brightness decline with brightness output according to the specific requirements of individual applications.
Additional Features
- Laser safety guaranteed
- DICOM Simulation Mode
- Built-in Geometric Adjustment
- Art-Net DMX, Crestron Connected™, and PJLink™
- Rec. 709 Mode for HDTV Projection
- Fade In and Fade Out
Notes:
1 For lenses with a 0.4:1 throw-ratio or less as of February 2019 according to internal research.
2 Supports signals up to 4K/60p. 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection.
3 1080/60p signal transmission over distances up to 150 m (492 ft) requires CAT 5e or higher cable with optional ET-YFB200G DIGITAL LINK Switcher (not compatible with 4K signals) and the projector set to Long Reach Mode. Direct transmission is supported over distances up to 100 m (328 ft) for 1080/60p video signals or 50 m (164 ft) for 4K/60p video signals.
4 PT-RZ990/RZ890 feature a heat-pipe-based cooling system. PT-RZ790/RZ690 feature a heat-sink-based cooling system.
5 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast Contents, Normal Mode, Dynamic Contrast [3], temperature 30 °C (86 °F), elevation 700 m (2,297 ft) with 0.15 mg/m3 of airborne particulate matter. Panasonic recommends cleaning or checkup at point of purchase after about 20,000 hours. Light-source lifetime may be reduced depending on environmental conditions. Replacement of parts other than the light source may be required in a shorter period. Estimated maintenance time varies depending on environment.
6 The combination of primary/secondary input terminals is fixed. Input switching occurs automatically when the signal to the primary input is disrupted or restored. Backup Input Setting is enabled only when the input signal to primary and secondary terminals is the same.
7 Free 90-day trial available upon installation of Multi Monitoring & Control Software Ver. 2.0 or later. Multi Monitoring & Control Software Ver. 2.0 or later is required for Early Warning Functions. Purchase a license and activate at PASS when trial period expires to continue using Early Warning Functions.
8 While input resolution will not change, maintaining image quality is not possible for images enlarged horizontally and vertically via the digital zoom function.
9 Audio transmission depending on model’s audio capability.
10 1080/60p signal transmission over distances up to 150 m (492 ft) requires CAT 5e or higher cable with optional ET-YFB200G DIGITAL LINK Switcher (not compatible with 4K signals) and the projector set to Long Reach Mode. Direct transmission is supported over distances up to 100 m (328 ft) for 1080/60p video signals or 50 m (164 ft) for 4K/60p video signals.
11 Excludes passwords, projector name/ID, and network settings.
12 Data-cloning function supported on identical projectors only.
Specifications
| Projector type | 1-Chip DLP™ projector | |
|---|---|---|
| DLP™ chip | ||
| Panel size | 17.0 mm (0.67 in) diagonal (16:10 aspect ratio) | |
| Display method | DLP™ chip x 1, DLP™ projection system | |
| Number of pixels | 2,304,000 (1920 x 1200 pixels) | |
| Light source | Laser diodes | |
| Light output | 7,000 lm (Normal)*1/7,200 lm (Center)*2/5,600 lm (Eco)*1 2,800 lm (Long Life 1)*1/2,300 lm (Long Life 2)*1/1,900 lm (Long Life 3)*1 |
|
| Time until light output declines to 50 %*3 | 20,000 hours (Normal)/24,000 hours (Eco) | |
| Resolution | 1920 x 1200 pixels (WUXGA) | |
| Contrast ratio*1 | 10,000:1 (Full On/Full Off, Dynamic Contrast [3]) | |
| Screen size (diagonal) | 1.27–15.24 m (50–600 in) 1.27–5.08 m (50–200 in) with ET-DLE055 2.54–8.89 m (100–350 in) with ET-DLE035 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
|
| Center-to-corner zone ratio*1 | 90 % | |
| Lens | Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm | |
| Lens shift*4 (From the origin point of the lens mounter) | ||
| Vertical | +50 %, -16 % (powered) +40 %, -16 % with ET-DLE060 |
|
| Horizontal | +30 %, -10 %(powered) +10 %, -20 % with ET-DLE020 +19 %, -10 % with ET-DLE060 +28 %, -10 % with ET-DLE105/ET-DLE085 |
|
| Keystone correction range | Vertical: ±40 ° ±5 ° with ET-DLE020 ±16 ° with ET-DLE060 ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055 +5 ° with ET-DLE035 Horizontal: ±15 ° ±10 ° with ET-DLE060 (cannot be operated with ET-DLE035/ET-DLE020) |
|
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±45 ° ±16 ° with ET-DLE060 ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170 ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055 Horizontal: ±40 ° ±10 ° with ET-DLE060 ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055 When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD/SD-SDI input | |
| HDMI IN | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*5) | |
| DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| RGB 1 IN | RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR | |
| RGB 2 IN | D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR | |
| SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control | |
| REMOTE 1 IN | M3 x 1 for wired remote control | |
| REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) | |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK connections (HDBaseT™ compliant), PJLink™ (Class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color compatible, 4K/60p signal input*5 | |
| LAN | RJ-45 x 1 for network connection, PJLink™ (Class 2) compatible, 10Base-T/100Base-TX, Art-Net compatible | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Power consumption | 545 W (Normal)/435 W (Eco) 215 W (Long Life 1)/195 W (Long Life 2)/170 W (Long Life 3) |
|
| Cabinet materials | Molded plastic | |
| Operation noise*1 | 36 dB (Normal) | |
| Dimensions (W x H x D) | 498 x 200*6 x 581 mm (19 19/32" x 7 7/8"*6 x 22 7/8") with supplied lens | |
| Weight*7 | Approx. 22.1 kg (48.7 lb) with supplied lens | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*8 Operating humidity: 10–80 % (no condensation) |
|
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
Notes:
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2020 international standards. Value is average of all products when shipped.
*2 Average light-output value of all shipped products measured at center of screen in Normal Mode.
*3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, Normal Mode, Dynamic Contrast [3], under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*4 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035.
*5 4K signals are converted to the projector's resolution (1920 x 1200 pixels) upon projection. Supported terminals: DIGITAL LINK/HDMI®.
*6 With legs at shortest position.
*7 Average value. May differ depending on the actual unit.
*8 The light output may be reduced to protect the projector depending on the temperature or altitude of operational environment.
Accessories
Optional Lenses
ET-DLE170 1ET-DLE030 is discontinued. Compatible with 1-Chip DLP projectors up to 10,000 lumens. 2ET-DLE080 is discontinued. Compatible with 1-Chip DLP projectors up to 8,500 lumens.
Model
ET-DLE020
ET-DLE035
ET-DLE0301ET-DLE060
ET-DLE055
ET-DLE085
ET-DLE0802ET-DLE105
ET-DLE150
Std LensET-DLE250
ET-DLE350
ET-DLE450
Price
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
$500.00
Add to Cart
Add to Cart
Add to Cart
Add to Cart
D:W WUXGA
0.28–0.30:1
0.38:1
0.60–0.80:1
0.79:1
0.78–0.98:1
0.98–1.32:1
1.30–1.89:1
1.71–2.41:1
2.27–3.62:1
3.58–5.45:1
5.36–8.58:1
F/stop
2.0
2.0
1.85–2.34
1.75
1.85–2.20
1.85–2.35
1.84–2.44
1.65–1.87
1.83–2.27
1.82–2.24
1.83–2.35
Model
Z-DLE055C
Z-DLE066A
Price
$999.00
Add to Cart
$750.00
Add to Cart
D:W
WUXGA0.42:1
0.75–0.78:1
F/stop
2.6
2.2
Other Accessories
 |
Ceiling mounts | |
 |
Digital Interface Box (ET-FYB100G) | |
 |
DIGITAL LINK Switcher (ET-FYB200G) | |
 |
Geometry Manager Pro Software (ET-UK20) |
$1,683.00
Add to Cart
|