The ET-SFD310 smoke-cut filter is an air filter unit for select Panasonic 3-chip DLP™ projectors. It is designed for use at events or other situations where smoke, fog or haze is generated as a special effect.
Please check the Compatibility tab to determine if this accessory will work with your projector.
|Dimensions (W × H × D):||2-7/16" × 5-13/32" × 13-1/32" (62 × 137 × 331 mm)|
|Weight:||15.7 oz (446 g)|
Note: Weights and dimensions shown are approximate. Specifications subject to change without notice.
- When the filter is attached, be sure to switch the filter type on the projector’s onscreen menu.
- The filter can be used for approximately 24 hours in smoky, foggy or hazy environments. Note that the filter cannot be reused. After use, replace it with an unused filter
- The filter cannot be used at altitudes of 4,593 feet (1,400 meters) or more above sea level or when the ambient temperature is 95 °F (35 °C) or higher.
To check whether this item is compatible with your equipment, use the form below.