The ET-SFE16 smoke-cut filter is an air filter kit for select Panasonic and Eiki projectors, consisting of a pleated smoke-resistant filter and filter base. It is designed for use at events or other situations where smoke, fog or haze is generated as a special effect.
Please check the Compatibility tab to determine if this accessory will work with your projector.
18-29/32 × 2-3/8 × 18-31/32 inches (482 × 60 × 480 mm)
Approximately 3.3 lbs (1.5 kg)
*Average value. May differ depending on models.
Note: Weights and dimensions shown are approximate. Specifications subject to change without notice.
- When the filter is attached, be sure to switch the filter type on the projector’s onscreen menu.
- The filter can be used for approximately 24 hours in smoky, foggy or hazy environments. Note that the filter cannot be reused. After use, replace it with an unused filter.
- The operating temperature range is 41°F–104°F (5°C–40°C) when used at altitudes of 1,640 feet (500 meters) or less above sea level. The filter cannot be used when the ambient temperature is 104°F (40°C) or higher. The operating temperature range is 41°F–86°F (5°C–30°C) when used at altitudes between 1,640 and 4,593 feet (500 and 1,400 meters) above sea level. The filter cannot be used at altitudes of 4,593 feet (1,400 meters) or more above sea level or when the ambient temperature is 95°F (35°C) or higher.
To check whether this item is compatible with your equipment, use the form below.