Panasonic ET-MDN12G10

12G SDI Input Board
Item #0601-2658 Model #ETMDN12G10


Panasonic ET-MDN12G10

12G-SDI Signal Board

This is an input board for mounting to select 3-chip DLP™ projectors, which allows input of 12G-SDI signal systems.

This unit does not operate as a stand-alone unit. Use it by mounting to a compatible 3-chip DLP™ projector (sold separately). Please check the Compatibility tab to determine if this accessory will work with your projector.

It is recommended that installation and removal of the interface board for the main projector unit should be carried out by a qualified technician. Please contact the place of purchase.


Compatible slot SLOT NX specifications
Interfaces 2 x video - 12G-SDI input - BNC
2 x video - 3G-SDI input/output - BNC
Compatible slots 1 x expansion slot
Dimensions (WxHxD) 5-15/16 x 1-17/32 x 5-19/32 in (151 x 38.5 x 142 mm)
Weight Approx. 14.1 oz (400 g)


  • "SLOT NX" is a name of the slot unique to Panasonic supporting the signal input for the 4K image.
  • The video signal that can actually display will vary depending on the display device (projector or flat panel display) on which the Interface Board is installed. For details, refer to the Operating Instructions of your display device.
  • When the main projector unit is in standby mode, signals are not output from the (SDI 2 IN/1 OUT) or the (SDI 4 IN/3 OUT) terminals



To check whether this item is compatible with your equipment, use the form below.

  • Select a brand from the list first.