HOME

Products

Email:
Sales

Customer
Service

View Order
spacer
Audio General Incorporated
1-866-866-2600
  HOME > Products > Da-Lite Screens > Electric > Tensioned Contour Electrol

Save more by ordering a screen with a projector - call or email us for a quote!
Tensioned Contour Electrol Tensioned Contour Electrol
  • The easiest of all electric screen models to install - for wall or ceiling surface mounting
  • Optional remote and low voltage controls come factory installed
  • Power wires enter through the rear
  • Screen is tensioned to create an extra-flat surface for optimum image quality when viewing data or graphics
  • Standard with white or black extruded aluminum case; graphite and wood veneer finishes are also available
  • Unless stated otherwise, screens are standard with 12" black drop
Spec Sheet
Instructions
Video (4:3) Format Tensioned Contour Electrol
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution.
Viewing Area
(+) Black Border
43" x 57" 1.25" $1,406   Add to Order $1,406   Add to Order $1,526   Add to Order $1,619   Add to Order $1,619   Add to Order $1,855   Add to Order $1,573   Add to Order $1,573   Add to Order $1,643   Add to Order $1,643   Add to Order
50" x 67" 1.5" $1,508   Add to Order $1,508   Add to Order $1,639   Add to Order $1,731   Add to Order $1,731   Add to Order $1,967   Add to Order $1,699   Add to Order $1,699   Add to Order $1,745   Add to Order $1,745   Add to Order
60" x 80" 2.0" $1,689   Add to Order $1,689   Add to Order $1,841   Add to Order $1,935   Add to Order $1,935   Add to Order $2,171   Add to Order $1,901   Add to Order $1,901   Add to Order $1,926   Add to Order $1,926   Add to Order
69" x 92" 2.0" $1,729   Add to Order $1,729   Add to Order $1,883   Add to Order $1,974   Add to Order $1,974   Add to Order $2,211   Add to Order $1,941   Add to Order $1,941   Add to Order $1,965   Add to Order $1,965   Add to Order
87" x 116" 2.0" $2,043   Add to Order $2,043   Add to Order $2,175   Add to Order $2,268   Add to Order $2,268   Add to Order $2,504   Add to Order $2,235   Add to Order $2,235   Add to Order $2,279   Add to Order $2,279   Add to Order
108" x 144" 2.0" $2,353   Add to Order $2,353   Add to Order $2,484   Add to Order $2,577   Add to Order $2,577   Add to Order Not Available $2,543   Add to Order $2,543   Add to Order Not Available Not Available
120" x 160" 2.0" $2,484   Add to Order $2,484   Add to Order $2,616   Add to Order $2,709   Add to Order $2,709   Add to Order $2,677   Add to Order $2,677   Add to Order
Please note: 120" x 160" screens have 4" black drop
HD (16:9) Format Tensioned Contour Electrol
Recommended for use with native 16:9 projectors such as those with WXGA, 720p and 1080p resolution.
Viewing Area
(+) Black Border
45" x 80" 2.0" $1,680   Add to Order $1,680   Add to Order $1,703   Add to Order $1,926   Add to Order $1,926   Add to Order $2,162   Add to Order $1,892   Add to Order $1,892   Add to Order $1,916   Add to Order $1,916   Add to Order
52" x 92" 2.0" $1,731   Add to Order $1,731   Add to Order $1,885   Add to Order $1,977   Add to Order $1,977   Add to Order $2,213   Add to Order $1,943   Add to Order $1,943   Add to Order $1,967   Add to Order $1,967   Add to Order
54" x 96" 2.0" $1,773   Add to Order $1,773   Add to Order $1,906   Add to Order $1,998   Add to Order $1,998   Add to Order $2,234   Add to Order $1,964   Add to Order $1,964   Add to Order $2,009   Add to Order $2,009   Add to Order
58" x 104" 2.0" $1,892   Add to Order $1,892   Add to Order $2,027   Add to Order $2,126   Add to Order $2,126   Add to Order $2,363   Add to Order $2,094   Add to Order $2,094   Add to Order $2,129   Add to Order $2,129   Add to Order
65" x 116" 2.0" $2,045   Add to Order $2,045   Add to Order $2,177   Add to Order $2,270   Add to Order $2,270   Add to Order $2,506   Add to Order $2,237   Add to Order $2,237   Add to Order $2,282   Add to Order $2,282   Add to Order
78" x 139" 2.0" $2,356   Add to Order $2,356   Add to Order $2,487   Add to Order $2,579   Add to Order $2,579   Add to Order $2,816   Add to Order $2,547   Add to Order $2,547   Add to Order $2,592   Add to Order $2,592   Add to Order
2 - Built-in Control Options
4 - General Screen Accessories
 
Optional Case Finishes
Veneer CaseGraphite Case
1A Veneer Case. Choose from seven veneer finishes. Cases with Honey Maple, Light Oak and Medium Oak finishes come standard with white base and end caps; Cherry, Mahogany, Natural Walnut and Heritage Walnut cases come with black base and end caps. Must be ordered with screen. $125   Add to Order
1B Graphite Case. Must be ordered with screen. $125   Add to Order
Built-In Control Options
Built-in Network ControllerVideo Projector Interface
[No Image
Available]		 Silent Motor. Available in sizes up to 180" diagonal. Must be ordered with screen. $125   Add to Order
[No Image
Available]		 Silent Motor and Built-In Low Voltage Controller. Includes White 3-Button LVC Switch. Available in sizes up to 180" diagonal. Must be ordered with screen. $305   Add to Order
[No Image
Available]		 Built-In Low Voltage Controller. Includes White 3-Button LVC switch. Must be ordered with screen. $188   Add to Order
2A Built-in SCB-100 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-100 Controller. A single Serial Control Board provides control over any single motor screen, masking screen, or projector lift. Can provide status of whether screen is up, down, or in stop positions. Must be ordered with screen. Tutorial. $305   Add to Order
NET-100 Ethernet-Serial Adapter. Allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. $185   Add to Order
Built-in SCB-200 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-200 Controller, wall controller, or infrared controller. Can provide status of whether screen is up, down, or in stop positions. Multiple SCB-200 controllers may be daisy-chained* for multi-aspect ratio screens while using a single RS-232 connection or optional controller. Must be ordered with screen. Tutorial. $265   Add to Order
NET-200 Ethernet-Serial Adapter. Allows any SCB-200 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. Tutorial. $127   Add to Order
2B Built-in Video Projector Interface. 12V Direct Current Trigger. Allows screen to be raised or lowered automatically when projector is turned on or off. White rocker switch with white wall plate included for manual operation. Projector must have a 12 volt or 5 volt lead to operate this interface. Must be ordered with screen. Tutorial. Call
*Daisy-chained: describes the linear arrangement of devices as connected one to the next in order, without connection to the other devices in the chain.
RF RemoteIR RemoteLVC SwitchKey Locking Cover PlateWC-200IR-200
2C Radio Frequency Remote Receiver for use with built-in low voltage controller. Includes RF transmitter. $190   Add to Order
Spare/Replacement Radio Frequency Transmitter for use with built-in low voltage controller. $112   Add to Order
2D Infrared Remote Receiver for use with built-in low voltage controller. Includes IR transmitter. $74   Add to Order
Spare/Replacement Infrared Transmitter for use with built-in low voltage controller. $58   Add to Order
2E White 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
Ivory 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
2F Key Locking Cover Plate. Opens with a key to allow access to 3-button LVC switch. Stainless steel finish. $63   Add to Order
2G WC-200 Wall Controller. Decora-style wall controller powered from the SCB-200. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios with status LEDs. The WC-200 has a built-in IR receiver for use with the RM-200 infrared remote control. $116   Add to Order
2H IR-200. Includes the RM-200 14-button infrared transmitter and an infrared receiver for wireless control over SCB-200 equipped screens. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios. $87   Add to Order
2I RM-200. Spare/Replacement Infrared Transmitter for use with the WC-200 and IR-200. $60   Add to Order
External Control Options
SCB-100Video Projector Interface
3A External SCB-100 Serial Control Board. Allows for control over a screen using RS-232C communication and/or relay closures. A single Serial Control board provides control over any single motor screen, masking screen, or projector lift. Tutorial. Installation. $315   Add to Order
NET-100 Ethernet-Serial Adapter allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Tutorial. $185   Add to Order
3B External Video Projector Interface. Allows screen to be raised or lowered automatically when projector is turned on or off. Projector must have a 5-12 volt trigger to operate this interface. White rocker switch with white wall plate is included for manual operation. Tutorial. Installation. $100   Add to Order
Low Voltage ControllerRF RemoteIR RemoteLVC SwitchKey Locking Cover Plate
3C External Low Voltage Controller with White 3-Button LVC Switch. Tutorial. Installation. $188   Add to Order
3C+3D External Low Voltage Controller with White 3-Button LVC Switch and Radio Frequency 3-Button Transmitter and Receiver. Up to 75' range. $373   Add to Order
3C+3E External Low Voltage Controller with White 3-Button LVC Switch and Infrared 3-Button Transmitter and Receiver. Up to 50' range. $262   Add to Order
3D Radio Frequency Remote Control System (transmitter and receiver). Requires a low voltage controller. $176   Add to Order
Spare/Replacement Radio Frequency Transmitter.. $112   Add to Order
3E Infrared Remote Control System (transmitter and receiver). Requires a low voltage controller. $74   Add to Order
Spare/Replacement Infrared Transmitter. $58   Add to Order
3F White 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
Ivory 3-Button LVC Switch. Requires a low voltage controller. $64   Add to Order
3G Key Locking Cover Plate. Hinged cover plate installs over the top of an existing LVC 3-button wall switch. Opens with a key to allow access to switch. Stainless steel finish. $63   Add to Order
General Screen Accessories
White SwitchStainless SwitchKey Locking Cover PlateKey Switch
Please Note: Line Voltage Switch Options Cannot be Used with LVC
4A White 3-Position Wall Switch with Decora® cover plate. (included with all single motor electric screens). $42   Add to Order
Ivory 3-Position Wall Switch with Decora® cover plate (may be specified at no charge in place of the standard white switch above). $42   Add to Order
4B Stainless Steel 3-Position Wall Switch. $60   Add to Order
Stainless Steel 3-Position Wall Switch, as substitute for standard white switch. Must be ordered with screen. $20   Add to Order
4C Key Locking Cover Plate. Hinged cover plate installs over the top of an existing 3-position wall switch. Opens with a key to allow access to switch. Stainless steel finish. $63   Add to Order

4D

 Key Operated 3-Position Wall Switch. Flush-mounted wall control switch is key-activated for security. White finish. $72   Add to Order
Click here to view our selection of Laser Pointers!