|
Targa |
- Ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms, and conference rooms
- The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically reduced
- Trim, balanced appearance
- Pentagonal steel case is scratch-resistant white polyester finish with matching endcaps (black optional, for no extra charge)
- Operates instantly at the touch of a button and stops automatically in the "up" and "down" positions
- Viewing surface can be lowered to any position at the touch of a switch
- Video and HDTV formats have black borders on all four sides
- 2" of black drop standard; HDTV (16:9) sizes marked with "*" include 12" black drop as standard
- Options such as extra drop (up to 12' overall height) and remote controls are available upon request
- Warranted for one year against defects in materials and workmanship
- Custom sizes available
Spec Sheet
Instructions |
Video (4:3) Format
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution. |
Image Area
 |
Diagonal
|
|
|
|
|
|
|
|
|
|
|
Not Available |
Not Available |
|
50" x 66.5" |
7' |
|
|
|
|
60" x 80" |
100" |
|
|
|
|
|
69" x
92" |
10' |
|
|
|
|
|
78" x
104" |
11' |
|
|
|
Not Available |
Not Available |
87" x
116" |
150" |
|
|
|
105" x
140" |
15' |
|
|
Not Available |
|
118" x 158" |
200" |
|
|
HDTV (16:9) Format
Recommended for use with native 16:9 projectors such as those with WXGA, 720p, and 1080p resolution.
Please Note: Sizes marked with "*" include 12" black drop as standard. |
Image Area |
Diagonal |
|
|
|
|
|
|
|
|
|
|
Not Available |
Not Available |
36" x
64" |
73" |
|
|
|
40.5" x
72" |
82" |
|
|
|
45" x
80" |
92" |
|
|
|
|
|
52" x
92" |
106" |
|
|
|
|
|
58" x
104" |
119" |
|
|
|
|
|
65" x
116" |
133" |
|
|
|
|
|
79" x
140" |
161" |
|
|
|
Not Available |
Not Available |
90" x
160" |
184" |
|
|
|
1 - Built-In Options  2 - External Control Options 3 - General Screen Accessories
|
|
Mounting Accessories
|
  |
| A |
Ceiling Opening Trim Kit. Attaches to the screen endcaps and forms a finished slot in the ceiling allowing for passage of the projection screen surface. White finish. Please note: Draper recommends 12" extra drop when ordering Ceiling Opening Trim Kit. |
| For cases 102.5" and shorter; finished slot length is 102.5". |
|
| For cases 102.5" - 126.5" long; finished slot length is 126.5". |
|
| For cases 126.5" - 174" long; finished slot length is 174". |
Call |
| B |
Projected Mounting Brackets, pair. Non-adjustable wall brackets provide 6" clearance. Instructions. |
|
| Built-In Options |
    |
| 1A |
Built-In Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control. Must be ordered with screen. Spec Sheet.
|
|
| [No Image Available] |
Built-In Quiet Motor. Reduces motor noise by approximately 30%. Must be ordered with screen. |
|
| [No Image Available] |
Quiet Motor and Built-In Low Voltage Control Module (LVC-III). Combines the benefits of quiet operation and low voltage control. Must be ordered with screen. |
|
| 1B |
Infrared Transmitter and Receiver (IRT/R) for use with built-in LVC-III. Hand-held IR transmitter. Requires LVC-III. Spec Sheet. |
|
Spare/Replacement Infrared Transmitter. |
|
| 1C |
Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III. Spec Sheet. |
|
| 1D |
Low Voltage Switch with Locking Cover Plate (LVC-S-LCP). Single-gang 3-button wall switch with locking metal cover plate. Requires LVC-III. Spec Sheet. |
Call |
| External Control Options |
       |
| 2A |
External Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet. |
|
| 2B |
Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor via 2-way serial communication, a low voltage wall switch, IR remote control, or RF remote control. Spec Sheet. |
|
| 2C |
Internet Protocol Device (LS100). Allows the connection of ethernet devices (such as network and control systems) to the MC1. Manual. |
Call |
| 2D |
Infrared Transmitter and Receiver (IRT/R). Hand-held IR transmitter. Requires LVC-III or MC1. Spec Sheet. |
|
Spare/Replacement Infrared Transmitter. |
|
| 2E |
Radio Frequency Transmitter and Receiver (WRT/R). Hand-held RF transmitter. Requires LVC-III or MC1. Spec Sheet. |
|
Spare/Replacement Radio Frequency Transmitter. |
|
| 2F |
Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC1. Spec Sheet. |
|
| 2G |
Low Voltage Switch with Locking Cover Plate (LVC-S-LCP). Single-gang 3-button wall switch with locking metal cover plate. Requires LVC-III or MC1. Spec Sheet. |
Call |
  |
| 2H |
Video Interface Control (VIC-6, VIC-12, VIC-115). Allows screen to be controlled by projector switch - when the projector comes on the screen descends automatically. Replaces the standard single-station control switch for all screens where a trigger circuit is turned on to lower the screen and off to raise the screen. Please note: this item cannot be used with any other control except for the optional override switch (below). |
VIC-6. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
VIC-12. For use where a 12V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
VIC-115. For use where a 115V trigger circuit is turned on to lower the screen and off to raise the screen. Spec Sheet. |
|
| 2I |
Video Interface Override Switch (VIC-OS). Lowers a screen that is normally controlled by a VIC-6, VIC-12, or VIC-115 in situations where the video projector will not be used (for example, when an overhead or slide projector is used instead of the video projector). Stainless steel. Spec Sheet. |
|
| General Screen Accessories |
    |
| [No Image Available] |
Extra Black Drop. Price is per square foot. |
|
| 3A |
Single Station Control Switch (SS-1R). Standard control switch included with all electric screens. Single-gang 3-position rocker switch with cover plate. Silver satin cover plate, black switch. 115V. Spec Sheet. |
|
White Single Station Control Switch (SS-1R). Same as SS-1R, but cover plate is white plastic. 115V. |
|
| [No Image Available] |
Multiple Station Controls (MS-3R/MS-4R). Used to control one screen from multiple locations. Automatic override allows only one signal to reach the motor when switches are operated simultaneously. 115V. Silver satin cover plate, black switch. Spec Sheet. |
|
| 3B |
Key-Operated 3-Position Switch (KS-3). Replaces the Single Station Control Switch where the security of a key switch is required. Stainless steel. 115V. Spec Sheet. |
|
| 3C |
Locking Switch Cover Plate (SP-KPS-I). Replaces the Single Station Control Switch where the controls need to be secured behind a locking cover plate. 3-position toggle switch is ivory; cover plate and locking switch cover are brushed stainless steel. 115V. Spec Sheet. |
|
| 3D |
Key-Operated Power Supply Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115V. Spec Sheet. |
|
