Tensioned Advantage Deluxe Electrol Tensioned Advantage® Deluxe Electrol®
  • Handsome white powder-coated closure doors and case provide a clean look and allow easy
    installation of ceiling tiles
  • Designed to have the case installed during the "rough-in" stages of construction and the fabric
    assembly during the finish stage
  • Patented in-th-roller motor mounting system for quiet operation
  • Tab guide cable system maintains even lateral tension to hold surface flat; custom slat bar with
    added weight maintains vertical tension
  • Standard with 12" black drop at the top. Screens can be ordered with extra black drop;
    however, adding extra drop may alter case dimensions.
  • Standard with built-in Low Voltage Control and Decora-style 3-button wall switch; built-in
    SCB100 and SCB-200 (RS-232 control) are available options
  • The Tensioned Advantage® Deluxe case meets Underwriters Laboratories (UL) Plenum Testing
    Standards for use in air handling space

Spec Sheet
Instructions

RETURNED DA-LITE PRODUCTS ARE SUBJECT TO A 25%, IF UNOPENED, OR 50%, IF OPENED, RESTOCKING FEE

Video (4:3) Format Tensioned Advantage® Electrol®
Recommended for use with native 4:3 projectors such as those with SVGA, XGA, and UXGA resolution.
Viewing Area
125x1
Diagonal
125x1
Da-Mat
125x1
HC Da-Mat
125x1
Da-Tex
125x1
Dual Vision
125x1
43" x 57" 72" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
50" x 67" 84" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
60" x 80" 100" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
69" x 92" 120" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
87" x 116" 150" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
108" x 144" 180" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
120" x 160" 200" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
For larger sizes, see Tensioned Large Advantage® Deluxe Electrol®
HD (16:9) Format Tensioned Advantage® Electrol®
Recommended for use with native 16:9 projectors such as those with WXGA, 720p and 1080p resolution.
     
Viewing Area
125x1
Diagonal
125x1
Da-Mat
125x1
HC Da-Mat
125x1
Da-Tex
125x1
Dual Vision
125x1
45" x 80" 92" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
52" x 92" 106" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
54" x 96" 110" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
58" x 104" 119" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
65" x 116" 133" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
78" x 139" 159" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
90" x 160" 184" Call or Email for Price Call or Email for Price Call or Email for Price Call or Email for Price
For larger sizes, see Tensioned Large Advantage® Deluxe Electrol®
2 - Built-in Control Options
4 - General Screen Accessories
Extra Drop
[No Image Available] Extra Black Drop. Price is per square foot. Must be ordered with screen. Call or Email for Price
Built-In Control Options
Built-in Network ControllerVideo Projector Interface
2A Built-in SCB-100 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-100 Controller. A single Serial Control Board provides control over any single motor screen, masking screen, or projector lift. Can provide status of whether screen is up, down, or in stop positions. Must be ordered with screen. $305   Add to Cart
NET-100 Ethernet-Serial Adapter. Allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. $234.40   Add to Cart
Built-in SCB-200 Network Controller. Allows for screen control using RS-232C communication or Ethernet connection through a NET-200 Controller, wall controller, or infrared controller. Can provide status of whether screen is up, down, or in stop positions. Multiple SCB-200 controllers may be daisy-chained* for multi-aspect ratio screens while using a single RS-232 connection or optional controller. Must be ordered with screen. $295   Add to Cart
NET-200 Ethernet-Serial Adapter. Allows any SCB-200 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. Must be ordered with screen. $144.80   Add to Cart
2B Built-in Video Projector Interface. 12V Direct Current Trigger. Allows screen to be raised or lowered automatically when projector is turned on or off. White rocker switch with white wall plate included for manual operation. Projector must have a 12 volt or 5 volt lead to operate this interface. Must be ordered with screen. Call or Email for Price
*Daisy-chained: describes the linear arrangement of devices as connected one to the next in order, without connection to the other devices in the chain.
RF RemoteIR RemoteLVC SwitchKey Locking Cover PlateWC-200IR-200
2C Radio Frequency Remote Receiver for use with built-in low voltage controller. Includes RF transmitter. $222.40   Add to Cart
Spare/Replacement Radio Frequency Transmitter for use with built-in low voltage controller. $138.40   Add to Cart
2D Infrared Remote Receiver for use with built-in low voltage controller. Includes IR transmitter. $88.80   Add to Cart
Spare/Replacement Infrared Transmitter for use with built-in low voltage controller. $66.40   Add to Cart
2E White 3-Button LVC Switch. Requires a low voltage controller. Call or Email for Price
Ivory 3-Button LVC Switch. Requires a low voltage controller. Call or Email for Price
2F Key Locking Cover Plate. Opens with a key to allow access to 3-button LVC switch. Stainless steel finish. $75.20   Add to Cart
2G WC-200 Wall Controller. Decora-style wall controller powered from the SCB-200. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios with status LEDs. The WC-200 has a built-in IR receiver for use with the RM-200 infrared remote control. $136   Add to Cart
2H IR-200. Includes the RM-200 14-button infrared transmitter and an infrared receiver for wireless control over SCB-200 equipped screens. Screen up, down, and stop functions are available as well as more advanced functionality such as preset and custom aspect ratios. $100.80   Add to Cart
2I RM-200. Spare/Replacement Infrared Transmitter for use with the WC-200 and IR-200. $71.20   Add to Cart
External Control Options
SCB-100Video Projector Interface
3A External SCB-100 Serial Control Board. Allows for control over a screen using RS-232C communication and/or relay closures. A single Serial Control board provides control over any single motor screen, masking screen, or projector lift. Installation. Call or Email for Price
NET-100 Ethernet-Serial Adapter allows any SCB-100 enabled screen to be controlled over a LAN or WAN using standard TCP/IP protocol and an available 10Base-T or 100Base-TX ethernet connection. $234.40   Add to Cart
3B External Video Projector Interface. Allows screen to be raised or lowered automatically when projector is turned on or off. Projector must have a 5-12 volt trigger to operate this interface. White rocker switch with white wall plate is included for manual operation. Installation. $140.80   Add to Cart
General Screen Accessories
White SwitchStainless SwitchKey Locking Cover PlateKey Switch
Please Note: Line Voltage Switch Options Cannot be Used with LVC
4A White 3-Position Wall Switch with Decora® cover plate (included with all single motor electric screens). $53.60   Add to Cart
Ivory 3-Position Wall Switch with Decora® cover plate (may be specified at no charge in place of the standard white switch above). $53.60   Add to Cart
4B Stainless Steel 3-Position Wall Switch. $71.20   Add to Cart
Stainless Steel 3-Position Wall Switch, as substitute for standard white switch. Must be ordered with screen. $20   Add to Cart
4C Key Locking Cover Plate. Hinged cover plate installs over the top of an existing 3-position wall switch. Opens with a key to allow access to switch. Stainless steel finish. $75.20   Add to Cart

4D

Key Operated 3-Position Wall Switch. Flush-mounted wall control switch is key-activated for security. White finish. $86.40   Add to Cart
Click here to view our selection of Laser Pointers!