(Dims w/Small Plenum
(Dims w/Large Plenum
|Price for Projector Lift Only
|Max. Projector Size (WxL)||8-3/4" x 18"||20" x 20"||18-3/4" x 25-1/2"||24-3/4" x 35"|
|Overall Lift Dims (WxL)||22-1/4" x 14"||22-1/4" x 14"||28-1/4" x 15"||31-1/4" x 15-7/8"|
|Ceiling Opening (w/Closure, WxL)||14-1/6" x 23-3/8"||24" x 24"||29-1/2" x 29-1/2"||29" x 39-1/2"|
|Optional Plenum Housing (WxL)||14-9/16" x 23-7/8"||25" x 25"||30-1/2" x 29-3/8"||31-3/4" x 39-5/8"|
|Max. Down Travel||20"||20"||32"||32"|
|Approx. Travel Time||14 sec.||14 sec.||23 sec.||23 sec.|
|Total Capacity||25 Lbs.||25 Lbs.||50 Lbs.||150 Lbs.|
|Net Weight of Lift||20 Lbs.||20 Lbs.||28 Lbs.||32 Lbs.|
|[Not Illustrated] Plenum Housing. Height varies according to choice of projector. Includes ceiling trim ring. Does not include ceiling closure panel.|
|Small Plenum Housing for AeroLift 25.||$502|
|Large Plenum Housing for AeroLift 25.||$835|
|Plenum Housing for AeroLift 50.||$705|
|Plenum Housing for AeroLift 150.||$750|
|[1A] Ceiling Closure Panel. Includes a baked enamel finish plate and threaded rods to hold the plate to the lift but does not include a trim ring that would attach to the ceiling. Ceiling material such as tiles may be glued to the bottom of the plate.|
|Small Ceiling Closure Panel for AeroLift 25.|
|Large Ceiling Closure Panel for AeroLift 25.|
|Ceiling Closure Panel for AeroLift 50.|
|Ceiling Closure Panel for AeroLift 150.|
|[Not Illustrated] Ceiling Finish Kit . Includes ceiling closure panel that attaches to lift and trim ring that attaches to ceiling. Do not order if plenum housing is ordered because this includes the trim ring - order the Ceiling Closure Panel instead.|
|Small Ceiling Finish Kit for AeroLift 25 for use with 16" on center joists|
|Large Ceiling Finish Kit for AeroLift 25 for use with suspended ceilings.|
|Ceiling Finish Kit for AeroLift 50.|
|Ceiling Finish Kit for AeroLift 150.||Call or Email for Price|
|[1B] Ceiling Access Door, white painted finish. A 2' x 2' hinged door provides access to lift above a finished ceiling for cleaning, maintenance, or repairs without having to damage the ceiling.
|[1C] Ceiling Access Door, recessed to accept ceiling tile. A 2' x 2' hinged door provides access to lift above a finished ceiling for cleaning, maintenance, or repairs without having to damage the ceiling.
|Factory Installed Cables. RGBHV, Video, and Control.||$550|
|[2A] Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control.
|[2A] As above, but includes (1) LVC-S Low Voltage Control Switch.|
|[2B] Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor with 2-way serial communication, contact closure, low voltage wall switch, IR remote control, or RF remote control. Has only one data input - order splitter below to expand the number of inputs. Includes boxes as shown in [2A].
|[Not Illustrated] Splitter to provide additional control inputs to the MC1. May require power supply below if additional inputs draw power.
|[Not Illustrated] Power supply for powering multiple loads such as receivers and lighted control stations.||Call or Email for Price|
|[2C]. Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC-1.
|[2D] Lighted Low Voltage Control Station (LVC-SL). Single-gang 3-button wall switch. Requires LVC-III or MC-1 and may require power supply above if used with other devices that combined exceed the rating of the controller's internal power supply.||$72|
|[2E] Infrared Remote Control. Hand-held transmitter; 3-button control. Requires LVC-III or MC-1.
|Spare/Replacement Infrared transmitter.||$64|
|[2F] Radio Frequency Remote Control. Infrared transmitter and receiver. 3-button control. Fully compatible with "learnable" IR master control systems. Requires LVC-III or MC-1.
|Spare/Replacement Radio Frequency transmitter.||$64|
|[2F] Video Interface Control/Ceiling-Recessed Video System. Operate projector lift in tandem with a Draper motorized projection screen using the Video Interface Control. The VIC replaces the screen’s switch; for the projector lift, use the standard switch or any control described above. Touch the switch - or wireless remote control - and the video projector lift and projection screen descend. At the end of the presentation, flip the switch and the lift and screen will rise automatically. Model VIC-115 integrates screen operation with equipment using a 115V switched outlet. May be purchased with an over-ride switch (VIC-OS), permitting independent operation. Please note: this item cannot be used with any other control except for the optional override switch (below).|
|VIC-6. For use with a 6V circuit trigger.
|VIC-12. For use with a 12V circuit trigger.
|VIC-115. For use with a 115V trigger circuit.
|[2G] Video Interface Override Switch (VIC-OS). Stainless Steel.
|[3A] Single Station Control Switch (SS-1R). Standard with all Draper projector lifts, except Scissor Lift, Phantom, and Orbiter. Single-gang 3-position rocker switch with cover plate. Silver satin cover plate, black switch. 115V.
|White Single Station Control Switch. Same as SS-1R, but cover plate is white plastic. 115V.||Call or Email for Price|
|[3B] Key Operated Power Supply Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115V.