Draper LCD Projector LIft

	LCD Projector Lift
	Most popular LCD/DLP/LCOS projectors fit easily inside this ceiling recessed unit Bomb bay style closure doors standard; flat ceiling closure is also available Aluminum plenum housing with white bomb bay closure doors is standard Contains internal switched duplex receptacle (115V AC) which is powered only when the unit is fully extended Innovative current sensor prevents the closing of unit until while the projector is running Projector may be mounted flush to bottom pan or a projector mount may be used A Single Station Control Switch (SS-1R, pictured below) is included; can also be operated using motorized lift controls One year warranty against defects in materials and workmanship Specs Technical Documents Drawing Planning Sheet Installation Instructions 220V Instructions Controls Planning Sheet Low Voltage Wiring
	Model A Bomb Bay Doors	Model A Flat Closure [1A]	Model B Bomb Bay Doors	Model B Flat Closure [1A]
Price		White Enamel ~~$420.80~~ Ceiling Tile ~~$3,298~~	~~$3,373~~	White Enamel ~~$1,421.60~~ Ceiling Tile ~~$3,538~~
Min. Clearance Height Required	18-3/4"	19-1/2"	23-3/4"	24-1/2"
Max. Projector/Cables + Mount Dimensions (HxWxL)	11" x 18" x18"		16" x 23" x 23"
Outside Dims (WxL)	24" x 24"		29" x 29"
Max. Down Travel	11-1/2"		16-1/2"
Approx. Travel Time	16 Sec.		21 Sec.
Total Lift Capacity	65 Lbs.		65 Lbs.
Net Weight of Lift	-		-
System Options

[1B] Ceiling Access Door, white finish. A 2' x 2' hinged door provides access to lift above a finished ceiling for cleaning, maintenance, or repairs without having to damage the ceiling. Instructions				~~$358~~
[1C] Ceiling Access Door, recessed to accept ceiling tile. A 2' x 2' hinged door provides access to lift above a suspended ceiling for cleaning, maintenance, or repairs without having to lift the tile. Instructions				~~$650~~
[Not Illustrated] Factory Installed Cables. RGBHV, Video, and Control.				Call or Email for Price
Control Options

[2A] Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor with a low voltage wall switch (not included), contact closure, IR remote control, or RF remote control. Spec Sheet				$155.25
[2A] As above, but includes (1) LVC-S Low Voltage Control Switch.				~~$238~~
[2B] Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor with 2-way serial communication, contact closure, low voltage wall switch, IR remote control, or RF remote control. Has only one data input - order splitter below to expand the number of inputs. Includes boxes as shown in [2A]. Spec Sheet Installation & Programming Wiring Splitter Wiring				~~$1,826~~
[Not Illustrated] Splitter to provide additional control inputs to the MC1. May require power supply below if additional inputs draw power. Splitter Wiring				$46
[Not Illustrated] Power supply for powering multiple loads such as receivers and lighted control stations.				Call or Email for Price
[2C]. Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC-1. Spec Sheet				$82
[2D] Lighted Low Voltage Control Station (LVC-SL). Single-gang 3-button wall switch. Requires LVC-III or MC-1 and may require power supply above if used with other devices that combined exceed the rating of the controller's internal power supply.				$72
[2E] Infrared Remote Control System (receiver not illustrated). Fully compatible with "learnable" IR master control systems. Hand-held transmitter; 3-button control. Requires LVC-III or MC-1. Spec Sheet				$328
[2E] Spare/Replacement Infrared transmitter.				$51
[2F] Radio Frequency Remote Control System (receiver not illustrated). Radio frequency transmitter and receiver. 3-button control. Requires LVC-III or MC-1. Spec Sheet				$450
[2F] Spare/Replacement Radio Frequency transmitter.				$64

[2G] Video Interface Control/Ceiling-Recessed Video System. Operate projector lift in tandem with a Draper motorized projection screen using the Video Interface Control. The VIC replaces the screen’s switch; for the projector lift, use the standard switch or any control described above. Touch the switch - or wireless remote control - and the video projector lift and projection screen descend. At the end of the presentation, flip the switch and the lift and screen will rise automatically. Model VIC-115 integrates screen operation with equipment using a 115V switched outlet. May be purchased with an over-ride switch (VIC-OS), permitting independent operation. Please note: this item cannot be used with any other control except for the optional override switch (below).
VIC-12. For use with a 12V circuit trigger. Spec Sheet
VIC-115. For use with a 115V trigger circuit. Spec Sheet
[2H] Video Interface Override Switch (VIC-OS). Stainless Steel. Spec Sheet
Power Switches

[3A] Single Station Control Switch (SS-1R). Standard with all Draper projector lifts, except Scissor Lift, Phantom, and Orbiter. Single-gang 3-position rocker switch with silver-satin cover plate and black switch. 115V only. Not compatible with LVC-III, MC1 or Trigger Control options. Spec Sheet				~~$58~~
[Not Illustrated] White Single Station Control Switch (SS-1R White), 115V only. Not compatible with LVC-III, MC1 or Trigger Control options.				Call or Email for Price
[Not Illustrated] Single Station Key Operated Momentary Control Switch (SP-KSM). Controls UP and DOWN but not STOP. 115/240V. Stainless steel cover plate included. Not compatible with LVC-III, MC1 or Trigger Control options. Spec Sheet				$88
[3B] Key Operated Cutoff Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115/240V. Spec Sheet				$115

HOME Products Email: Sales Customer Service View Order	Free shipping on orders over $50 ... no handling charges Hassle-free return policy Free technical support Competitive pricing
	HOME > Products > Draper Projector Lifts > LCD Projector Lift We carry Draper Screens, too!