Micro Projector Lift
[shown with optional Ceiling Closure Panel]
Micro Projector Lift
  • The Micro Projector Lift is small and convenient, just like the projectors it is designed to accommodate
  • Designed to fit within a 2' x 2' ceiling grid system
  • Projector's "show" position can be set ant any point with infinite adjustability, up to 4' extension
  • Utilizes Draper's exclusive 3-scissor design with a compact side-folding scissor
  • Load is lifted by two 1"-wide Kevlar® straps; a safety belt provides extra protection
  • Minimal amount of overhead ceiling space is required
  • Lifting capacity is 26 Lbs.
  • Projector may be mounted flush to bottom pan or a projector mount may be used
  • (1) Single Station Control Switch (SS-1R) is included; can also be operated using motorized lift controls
  • Warranted for one year against defects in materials and workmanship
PDF Spec Sheet

  Without Plenum Housing
250x1
With Optional Plenum Housing
250x1
Price for Projector Lift $3,257   Add to Cart $3,257   Add to Cart
Max. Projector Size (WxL) 18" x 18" 18" x 18"
Overall Lift Dims (WxL) 21" x 20-3/4" 21" x 20-3/4"
Ceiling Opening 23-1/2" x 23-1/2" 23-1/2" x 23-1/2"
Optional Plenum Housing (Trim Edge to Trim Edge) (Not Applicable) 23-7/8" x 23-7/8"
Max. Down Travel 4' 4'
Capacity 35 Lbs. 35 Lbs.
Net Weight of Lift 35 Lbs. 35 Lbs.
System Options
Ceiling Closure PanelCeiling Access DoorCeiling Access Door - Tile
[Not Illustrated] Plenum Housing. Height varies according to choice of projector. Includes ceiling trim ring. Does not include ceiling closure panel. $835   Add to Cart
[1A] Ceiling Closure Panel, white baked enamel finish. $542   Add to Cart
[Not Illustrated] Ceiling Finish Kit. Ceiling closure panel and ceiling trim ring to finish ceiling opening. $911   Add to Cart
[1B] Ceiling Access Door, white painted finish. A 2' x 2' hinged door provides access to lift above a finished ceiling for cleaning, maintenance, or repairs without having to damage the ceiling.

PDF Instructions
$358   Add to Cart
[1C] Ceiling Access Door, recessed to accept ceiling tile. A 2' x 2' hinged door provides access to lift above a finished ceiling for cleaning, maintenance, or repairs without having to damage the ceiling.

PDFInstructions
$650   Add to Cart
[Not Illustrated] Factory Installed Cables. RGBHV, Video, and Control. Call or Email for Price
Control Options
LVC-IIIMC1LVC-SLVC-SIRTWRT
[2A] Low Voltage Control Module (LVC-III). The LVC-III is used to control one 115V motor via a low voltage wall switch, IR remote control, or RF remote control.

PDF  Spec Sheet
$155.25   Add to Cart
[2A] As above, but includes (1) LVC-S Low Voltage Control Switch. $238   Add to Cart
[2B] Low Voltage Control Module with RS-232 (MC1). The MC1 is used to control one 115V motor with 2-way serial communication, contact closure, low voltage wall switch, IR remote control, or RF remote control. Has only one data input - order splitter below to expand the number of inputs. Includes boxes as shown in [2A].
$1,826   Add to Cart
[Not Illustrated] Splitter to provide additional control inputs to the MC1. May require power supply below if additional inputs draw power.

PDF Splitter Wiring
$46   Add to Cart
[Not Illustrated] Power supply for powering multiple loads such as receivers and lighted control stations. Call or Email for Price
[2C]. Low Voltage Control Switch (LVC-S). Single-gang 3-button wall switch. White plastic cover with oval buttons. Requires LVC-III or MC-1.

PDF Spec Sheet.
$52   Add to Cart
[2D] Lighted Low Voltage Control Station (LVC-SL). Single-gang 3-button wall switch. Requires LVC-III or MC-1 and may require power supply above if used with other devices that combined exceed the rating of the controller's internal power supply. $72   Add to Cart
[2E] Infrared Remote Control. Hand-held transmitter; 3-button control. Requires LVC-III or MC-1.

PDF Spec Sheet
$78   Add to Cart
Spare/Replacement Infrared transmitter. $64   Add to Cart
[2F] Radio Frequency Remote Control. Infrared transmitter and receiver. 3-button control. Fully compatible with "learnable" IR master control systems. Requires LVC-III or MC-1.

PDF Spec Sheet
$450   Add to Cart
Spare/Replacement Radio Frequency transmitter. $64   Add to Cart
VICVIC-OS
[2G] Video Interface Control/Ceiling-Recessed Video System. Operate projector lift in tandem with a Draper motorized projection screen using the Video Interface Control. The VIC replaces the screen’s switch; for the projector lift, use the standard switch or any control described above. Touch the switch - or wireless remote control - and the video projector lift and projection screen descend. At the end of the presentation, flip the switch and the lift and screen will rise automatically. Model VIC-115 integrates screen operation with equipment using a 115V switched outlet. May be purchased with an over-ride switch (VIC-OS), permitting independent operation. Please note: this item cannot be used with any other control except for the optional override switch (below).
VIC-6. For use with a 6V circuit trigger.

PDF Spec Sheet
$114   Add to Cart
VIC-12. For use with a 12V circuit trigger.

PDF Spec Sheet
$114   Add to Cart
VIC-115. For use with a 115V trigger circuit.

PDF Spec Sheet
$112   Add to Cart
[2H] Video Interface Override Switch (VIC-OS). Stainless Steel.

PDF Spec Sheet
$50   Add to Cart
General Accessories
SS-1RKS-1
[3A] Single Station Control Switch (SS-1R). Standard with all Draper projector lifts, except Scissor Lift, Phantom, and Orbiter. Single-gang 3-position rocker switch with cover plate. Silver satin cover plate, black switch. 115V.

PDF Spec Sheet
$58   Add to Cart
White Single Station Control Switch. Same as SS-1R, but cover plate is white plastic. 115V. Call or Email for Price
[3B] Key Operated Power Supply Switch (KS-1). 2-power supply switch mounts next to the operating switch and controls power to it. Stainless steel. 115V.

PDF Spec Sheet
$78   Add to Cart